CSL TECHNOLOGIES (M) SDN BHD

2010-11-04T08:41:00.000-07:00

2010-11-04T08:31:00.000-07:00

SUCCESS MOMENT

2010-11-04T08:16:00.000-07:00

CSL successfully wining "SME Green Excellence Award 2010"

CSL is bestowed on non-listed SMEs who have effectively integrated Green Technology in the production process and produced Green Technologies which are environmentally preferable and are now in great demand in local and overseas markets as well.

CSL has a strong evidence of Green Technology strategies and to which the ideas implemented were fresh, creative and innovative for the Green target objectives. We also actively implementing "Green" in our company policy as well as aggressively promoting awareness within our organization and to the public.

EVENT 2010

2010-10-22T07:35:00.000-07:00

Achievement 2010

2010-10-22T07:13:00.000-07:00

Project Photo Gallery

2009-12-22T08:30:00.000-08:00

Green Label

2009-11-18T08:18:00.000-08:00

Preface

2009-07-21T09:05:00.000-07:00

CSL Technologies (M) Sdn Bhd (CSL) is a design, fabricate and manufacturer of precast Lightweight Reinforced Concrete (LRC) decorative products and we are developing this decorative concrete products into more advance technology of cast sand stone. This is because it has been presented with the exclusive license from Australia to manufacture the “Artstone” & “LRC” product technologies and has led to improved quality, increased versatility and cost effectiveness that gave the company's growth a competitive edge.

The company is an extremely young and energetic team with an exciting opportunity to make an impact in the building construction industry. We meet all challenges with dedication and commitment while enhancing the living standards of the community. We also undertake the strength of practice and commitment to excellence, with total professionalism and expertise.

LRC Tech (M) Sdn Bhd has been completed various prestigious project not only Residential, Commercials, Hotels, Public Buildings, Mosque and Palaces projects throughout Malaysia, but oversea project like Italy, Taiwan and UAE as well.

Today, the business driven by innovation and technology, in year 2000 our company was invested more than a million into Research & Development and also has acknowledged the importance of having R&D capability to acquire new depth and strengths to support its spectrum of business activities.

In year 2009, our product has obtained Singapore Green Labelling Scheme (SGLS).
as "Green Label" product under category 22. LRC has achieved a remarkable growth in the building industry market and strived to improve every aspect of our performance. Our success as a business depends not only on our skills, quality and diversity of the Group’s assets, but also on our shared commitment to be a global partner and proudly in support of our vision as a market leader in building industry.

“LOOK MORE LIKE STONE THAN STONE LIKE”

Performance

2009-07-21T09:01:00.000-07:00

REINFORCEMENT
The bamboo strips are using to replace steel bar as reinforcement. Even for small or large element we shall cast-in during production process in place. Where the size shall be 1/8 of the bamboo diameter or 20mm wide splints are used, they shall be done in accordance with the requirements as tensile element in concrete design.
The use of bamboo as reinforcement in Portland cement precast concrete elements has been used as a construction material in certain areas for centuries, feasibility of replacement bamboo as the reinforcing material in precast concrete elements was conducted at the U. S. Army Engineer Waterways Experiment Station in 1964.

SHAPE / DESIGN
The element designs are to be formed in precast LRC to achieve whatsoever profiles indicated by the Architect’s drawings. Sometimes, client requested for individual design for their building. With special design and difference moulding has to be made.

FINISH
The LRC products are all produced in composite cement finished as specified by the Architect and as shown in the drawings. The surface will be received paint finish or any optional. Sometime, architect or client could select any acceptable variation in texture, color and appearance on the range of finish.

DEFECTS
The finished LRC products shall be as free as possible from surface imperfections such as blowholes, voids and ridges or any other defects that is visible on the end product when inspected from an appropriate distance. It could be fixed and repaired always.

STAINING
Any dirt on the LRC product due to storage, handling, transportation, and erection shall be removable. To facilitate, the products may be given a water-repellent treatment or upon request.

WATER PENETRATION
The LRC products shall not allow water to penetrate through the thickness of the elements so that dampness will not occurs on the inside face. Surface protection coat to be applied with painted or water proofing treatment immediately after installed.

FIRE RESISTANCE
The LRC products are non-combustible and meet the requirements of BS 476, Parts 4 “Fire Tests on Building Materials and Structures:” or BS E15, ASTM E136 when used as surface material, its flame spread index of zero and less than 5 smoke density.

THERMAL INSULATION
The LRC wall panel or block products shall be at 1.0 to 0.75 btu/in./hr/ft2/deg.F in accordance with British Standard.
*Note: Thermal insulation property of LRC is higher than GRC product and lighter in density.

GUARANTEE / WARRANTY
CSL Technologies (M) Sdn Bhd stands by the quality and workmanship of its complete range of products. Every stage of production has on-going quality controls in place. All products are manufactured to and exceed Malaysia and Australia Standards therefore no expressed guarantee or warrantee are given. Manufacturer’s liability is limited to replacement of product if inspected before installation. Products are supplied according to LRC Tech (M) Sdn. Bhd standard ‘Terms & Conditions of Sale’. However, AIG General Insurance (M) Berhad will insure for Comprehensive General Liability Insurance for limit of indemnity of RM 0.5million.

CARE & MAINTENANCE
LRC products are the closest representation to stone and will perform similarly to natural stone. The unique natural sandy texture requires care and attention. Unsealed and over a period of time, mould growth can appear, slight salts could rise to the surface and stains of general wear might become apparent. A professional sealing, painting and cleaning regime will prolong the “new look” with recommendations of proper waterproofing or others chemical applied.

EXTRAS
LRC delivers with its exclusive quality products, matching service and technical support. We can help transform your original architectural designs into one-off customized moulded products. Matching colours and design mixes are also available for a complete project. We also have given our maintenance team to serve you or your client after liability period services.

SAMPLES & DISPLAY
To discover more about precast LRC products, please visit our premises or browse at http://www.lrc.com.my/. LRC products colour and profile samples are available upon request. Please contact our customer service staff (03-5161 3799) for further arrangement.

Properties

2009-07-21T08:59:00.000-07:00

Material shall generally comply with relevant British Standards.

Portland Cement >35%

Fine Aggregate >60%
- Sand
- Flyash

Lightweight Aggregate 2~5%
- Cellulose Fiber
- Polystyrene Beads
- Perlite
- Air Entraining Agent

Water >10%

Admixture As required

CEMENT
The cement shall be Ordinary Portland Cement to BS 12 “Specification for Ordinary Portland Cement”. Fly ash is from coal burning waste ash which from coal burning power station and blended with cement.

SAND
Sand shall be washed river fine sand or dried silica sand free from soluble salts, clay particles and organic matter. The suitable composition is 90~95% silica, 2% maximum moisture, 1% maximum soluble salts, 0.5% maximum clay and organic material.

CELLULOSE FIBER
The cellulose fiber (waste paper pulp) shall be clean and free of lignin-based impurities with at least 20% of the fiber over 100mm square. The cellulose fiber or wood fiber which from waste paper (recycle paper) and it is serves a purpose similar to the reinforcing in reinforced concrete.

POLYSTYRENE CHIP
The polystyrene beads or chips (recycle from polystyrene foam waste) shall be clean and CFC free. Mainly to added in the lightweight concrete is to reducing the density and achieved a constant density require in the concrete. However it gives a very good thermal insulation if apply to wall panel.

WATER
The water shall be clean and free from deleterious matter. In general, water suitable for drinking should be adequate. Where tests are required, they shall be done in accordance with the requirements of BS 3128 “Methods of Test for Water for Making Concrete.”

Specification

2009-07-21T08:50:00.000-07:00

LRC product is a high performance of Cement based composite product. It consists of cellulose fiber that given flexural, tensile and impact strength. The cellulose fiber work with lightweight aggregate and admixture has an advantage of reduced density.

Autoclave used as steam curing process which high pressure (130psi) and high temperature (175oC) for 4 hours; to improve the LRC product physical characteristics and achieve early strength. The Autoclaving process changes the cement based product to a crystalline structure much stronger and more stable, further to expedite in delivery time compares to other conventional lightweight concrete technology products.

LRC products are non-combustible when used as surface decoration material with a flame-spread index of zero. It has achieved 3 hours fire rating test. (SIRIM. BS 476. parts 4)

TYPICAL PROPERTIES (At 28 days)

Property For Autoclave Cure

Bending: 5 - 8 Mpa
Shear Strength: 2 - 3 Mpa
Compressive Strength : 10 -15 Mpa
Impact Strength: 6 - 12 KJ/m2
Elastic Modules : 10 – 20 Gpa
Strain Failure : 1-2%
Dry Density : 1000 –1200 kg/m3
Fire Resistance : 3 hours
Water Absorption : 0.003ml/m2/sec
M.O.R : 19 Mpa
Freeze Thaw (50 cycles) : No deterioration

Property For Air Cure

Bending : 2 - 4 Mpa
Shear Strength : 1.5 - 2.5 Mpa
Compressive Strength : 8 -10 Mpa
Impact Strength : 5 - 10 KJ/m2
Elastic Modules : 10 – 20 Gpa
Strain Failure : 1-2 %
Dry Density : 1200 –1300 kg/m3
Fire Resistance : 3 hours
Water Absorption : 0.003 ml/m2/sec.
M.O.R : 15 Mpa
Freeze Thaw (50 cycles) : No deterioration

CEMENT
The cement shall be Ordinary Portland Cement to BS 12 “Specification for Ordinary Portland Cement”. Fly ash is from coal burning (waste ash) which from coal burning power station and blended with cement.

SAND
Sand shall be washed river fine sand or dried silica sand free from soluble salts, clay particles and organic matter. The suitable composition is 90~95% silica, 2% maximum moisture, 1% maximum soluble salts, 0.5% maximum clay and organic material.

CELLULOSE FIBER
The cellulose fiber (waste paper pulp) shall be clean and free of lignin-based impurities with at least 20% of the fiber over 100mm square. The cellulose fiber or wood fiber which from waste paper (recycle paper) and it is serves a purpose similar to the reinforcing in reinforced concrete.

POLYSTYRENE CHIP
The polystyrene beads or chips (recycle from polystyrene foam waste) shall be clean and CFC free. Mainly to added in the lightweight concrete is to reducing the density and achieved a constant density require in the concrete. However it gives a very good thermal insulation if apply to wall panel.

WATER
The water shall be clean and free from deleterious matter. In general, water suitable for drinking should be adequate. Where tests are required, they shall be done in accordance with the requirements of BS 3128 “Methods of Test for Water for Making Concrete.”

Introduction

2009-07-21T08:44:00.000-07:00

Lightweight Reinforced Concrete (LRC) product is an advanced technology in making all the decorative pre-cast architrave elements to external architectural design elements.

The design and develop by CSL Technologies (M) Sdn Bhd, pre-cast LRC decorative product signify a new generation of lightweight concrete material for the building industry. This revolutionary building material is from R&D partnership between Malaysian and Australian experts.

With LRC products, the effectiveness not only in COST SAVING, SPEED but the main factor of LIGHTWEIGHT is improved.

We are working closely with architectural professionals for last few years. The new ideas are being formed and boosting the versatility of LRC products into building industry today.

Herewith our Standard Range of pre-cast LRC products which consists of two main categories: -
LRC Architrave – For Building Product
· Cornices
· Copings
· Balustrades
· Window & Door Cornice
· Wall Capping or Panels
· Columns Cladding
· Keystone or Corbel
· Fencing Pier
· Arches
· Pedestals
· Pier Caps
· Bull-nose Step-treads

ArtStone® - For Landscape Product
· Planters & Pots
· Garden Ornaments
· Artificial Pond
· Fountain Components
· Pavers
· Decorative Art Panels
· Bollard stand

Management

2009-07-20T09:27:00.000-07:00

Since its founding in 1999, the CSL Technologies (M) Sdn Bhd has today grown to become one of the leading precast Lightweight Reinforced Concrete (LRC) decorative products manufacturer industries in Malaysia. The company has carved a solid reputation as an innovative, quality conscious designer with strong creative capabilities. LRC Tech (M) Sdn Bhd has made its mark by delivering high quality & safety products in conductive living environments showcased through each and every one of its home design in Malaysia and oversea market. The LRC core business activity of precast LRC decorative products is supported by Developers, Architects, Designers and Contractors. Therefore we are deliver excellent product and service quality of the highest standards to our customers.

Customer Service Principles

In LRC Tech (M) Sdn Bhd, we are committed to providing superior customer service with the highest standards and professionalism. In delivering the highest quality products, we are committed to the following principles:

We will:
Respond to your needs in 24 hours.
Treat you with friendliness, care, respect and integrity.
Provide you with timely and reliable service.
Provide you with innovative & safety products.
Make it convenient for you to do business with us.

Vision

To be THE BEST in all we do.
Achieving Quality, Health, Safety and Environment Friendly product.
Enhancing Customer Satisfaction & Maintaining Customer Loyalty.
Improving Cost Efficiency and Productivity.

Mission

We aim to provide superior customer service and satisfy customer needs through a culture of excellence to enhance shareholders' value. At the same time, to be a caring and responsible employer mindful of our social responsibility.

By
Alex Cheng
Director